Lights from Brat Guy Enterprises

If you click on an image below, it will opoen up a higher resolution picture.

#1 - My First Attempt. Named Chatter Star :) because it was my first, and well, yes, lots of chatter....

6061 Aluminum, SF E Series compatible threads. was meant to use CR2 body but was too long. Ended up using and AW IMR 16340 with fairly dented in ends to fit properly. Made on a Harbor Freigh mini-lathe.


#2 - Let's just jump right to Damascus :) . This is the proto for the Deuce

4340 + 1050 Steels, Triple Nichia 219b, uses 18350 battery. Made on a Harbor Freigh mini-lathe.


#3 - CR2 Mule or also known as "the light that killed the mini-lathe".

Solid Nickel 201 Body, Damascus mule head. SF E Series compatible threads. Uses McGizmo style engine. Killed the lathe twice on the Nickel 201. Sort of the turning point. If I wanted to keep going, I needed to do something about the lathe I was using. Go Big or Go home right? Since this isn't the last on the list, we know what happened :)


#4 - 18350 Nickel Silver, Deuce Body Styl, but start of the 3 ringed heads

Nickel Silver. Started out as an 18650 battery design, and due to some technical difficulties :0 it was salvaged into this 18350 light.


#5 - 18650 Aluminum Triple

Deuce style body grip, and 3 ringed head and tail. This was a gift to my nephew as part of sponsorship of his stock car


#6 - 18350 Nickel Silver

No discernable design on this one, just kind of design on the fly


#7 Copper Mule (Head Only)

Uses McGizmo style engine. I only did the head on this light. Body is McGizmo Aleph, and tail is from RPM.


#8 & 9 - 18650 Triples, Nickel Silver and Brass

More of the Deuce Body grip style and 3 ringed heads.


#10 - 16340 single emitter, Damascus and Titanium (Head Only)

Another one where I just made the head. I had a small piece of the original Del Ealy Damascus from the Mr. Bulk DamCham run, and a small piece of Ti, and I decided to create a 2 metal head to go along with the 2 metal Tain Nova body that it's paired with. Uses a McGizmo style engine and a reflector I cut down to fit the small head.


#11 - 18350 Stainless Steel Triple

More Deuce Style grip and 3 ringed head...


#12 - 18650 Damascus Triple

Set this one up with a Lux-RC 371d engine. 1080 and 15N20 Hand Forged Twist Damascus First to have the 3 ring design on head onad body


#13 - 18350 Triple. Aluminum

Another full 3 Ring Design, with my first attempt at bezel crenelations on my newly aquired mill.


#14 - Mokume EDC - Triple R design.

3 color straight grain mokume. Copper, Brass, Nickel Silver. Single emitter with 20mm reflector.


#15 - 18350 Copper Triple - Triple R design

C19210 High Copper (CuFe)


#16 - 18350 Brass Triple - Triple R design

C360 Brass


#17 - 18350 Nickel Silver Triple - Triple R design

German Nickel Silver


#18 - 18650 Nickel Silver Triple - Triple R design

German Nickel Silver


#19 - 18650 Copper Triple - Triple R design

C145 TeCu Copper


#20 - 18650 Aluminum Triple - Triple R design

6061 aluminum


#21 - Brass 16340 E-Series (Body only)

C360 Brass. Triple R body grip. Paired with a prototype McGizmo Sundrop head in brass


#22 - Brass Deuce Mule, 18350

Bringing back the Deuce styling, and added tail flutes


#23 - "The Beast" Triple

Special Request Build. Ti Body sections joined with a bronze connector, and a bronze tail and head. Uses 2 x 26650 batteries. Weighed in at 24 ounces!


#24 - Copper Deuce 18350.

C145 Copper, Triple engine


#25 - Brass Deuce 18350

Aspheric Engine, Tail flutes and crenelations at head and tail


#26 - Phosphor Bronze ??? Deuce 18350

Lux-RC 371d engine


#27 - "The Pounder"

Ti/Aluminum bronze "the pounder". Empty host with no electronics weighs in at 1lb 3.3oz.! 2x 26500 batteries, pushing a 3000k xp-l HI Lux-RC 371d driver. Deuce grip, and various Deuce themes with the rest of the machining. Size comparison shown with other know lights